How to Replace a UPVC Window Handle

If your upvc window handle is broken, don't panic. Replacing the handle made of upvc on windows is a straightforward task that can be done in just a few easy steps.

No matter if it's an in-line or a crank espagnolette window handle, they all have an elongated spindle that extends out of the back plate. The spindle is placed into the locking device.

Find out the lock type and handle

Over time window handles or locks can get damaged and lose function. The good thing is that this issue can often be fixed without having to replace the entire uPVC window unit. One of the first things you need to do is determine the type of lock and handle you have, as this will determine what parts will be required for replacement.

Identifying the type of handle can be identified by looking at the handle's base. A screw or pin is what holds the handle to its base. If the screw is missing, it could indicate that the handle has separated from the base section. If the handle has split internally and no longer grips onto the spindle, it could also mean that it needs replacing.

There are many different types of uPVC window handles however the most popular is the Espag handle. They are usually fixed with two bolts and the spindle is connected to the locking mechanism of the window frame. These handles are used on uPVC tilt and turn windows.

Another type of uPVC window handle is the Cockspur handle. They are similar to the Espag handle, replacement windows however they are a little further from the frame. These handles are generally used on older uPVC windows.

Finally, there are also Venetian window handles that are similar to the Espag handle, but have a flat base that allows them to be positioned in a flush position with the frame. These handles are a good option for homeowners who are looking for an elegant handle that can blend in with their uPVC frames. The handles are also available in a broad variety of colors to match any decor.

Measure the spindle

It's important to know how the handle is fixed before you purchase a replacement. This will tell you whether it's too tight or too loose and if it's able to fit into the window frame. You can do this by identifying what kind of handle you own and measuring the length of the spindle. The spindle is a steel shaft that connects your handle to the lock in the window frame. It's available in various sizes with the current industry standard being 8mm. Older handles could have a cross-section of 9mm so you'll have to measure your old handle to ensure you get the correct size replacement.

There are various kinds of window handles. The most commonly used are the inline Espagnolette handles and the cockspur handles. These handles operate an locking mechanism within the window with shootbolt rods that secure the window when it is closed. They are secured by screws or pins depending on the type of handle you've got.

You can find replacement handles for windows made of upvc online and in a lot of DIY stores. They are available in a variety of finishes and are suitable for new or replacement windows. They can also be key-locking or non-locking for extra security.

To remove the handle simply open the window and unscrew the screws that hold it in place. Place the screws in a container to protect them from damage. After the screws have been removed, carefully remove the handle and take a measurement from the base to the top of the spindle. This will give you the information necessary to purchase the correct replacement. The spindle of the handle is the shaft of steel that connects it to the lock gearbox in the window frame.

Remove the old handle

The replacement of the uPVC window handle is an easy task and usually takes less than five minutes with the appropriate tools. The first step is to identify the type of lock and handle, which will help you identify the right replacement. After that, weighing the spindle will help ensure that the new handle is a good to the existing one. The old handle will need to be removed and replaced with the new one.

Most uPVC handles come with inline Espagnolette handles. These handles have an internal spindle that slots into the locking mechanism of the window. They are usually easy to take off, but you may have to apply force when they are stuck. The handle is typically secured by two screws which can be removed using the aid of a screwdriver. You may also need to remove pins, depending on the type of handle.

After removing the screws you can take off the handle you were using previously. The top of the base plate will be visible once the handle is in an open position, revealing two screws that you can remove. If the sticker remains visible, you'll have to take it off.

Utilizing the screws from the handle, you are now able to screw the new handle into place. Align the screw holes on the window with the holes in the handle. After you've done this, replace the caps on the screws. Test the new handle. Changing a uPVC window can be a simple and quick task, but it's crucial to take the time to complete the task correctly.

Install the new handle

If you've managed to successfully remove the existing handle from the frame, it's time to fit your new handle. Begin by locating and removing the screws with your screwdriver. Once removed, place them in a safe location and Replacement windows move on to the next step.

Then screw the spindle into by aligning it with the hole. The holes on the handle to the ones in the window frame. Make use of screws of the same size as the previous.

The uPVC Espag handle is fitted with a spindle of 7mm square which turns the lock mechanism that is mounted on the window. This type of handle can be commonly found in modern uPVC windows. uPVC Cockspur (also known by the name Cotswold) handles feature an extended, curving nose that is secured to the frame's outer edge or cross member of the transom bar. They are often seen on older uPVC windows.

After the new handle is installed, it is important to verify that it functions correctly by locking and unlocking the window a few times. If everything goes according the plan, the replacement uPVC handle should be securely attached and working smoothly. If you have any problems, these steps will help you identify the issue and resolve it quickly. Bridgewater Glass can help you if you're having problems with your uPVC handles or any other home improvement that is glazed. Our glaziers have been trained to repair or replace a variety of window frames and handles, making us an excellent choice for your double glazing needs.

Test the new handle

Over time, uPVC handles be damaged and worn out. This can leave them less secure and efficient, so it's important to replace them as quickly as possible. It's also a good idea to do this after you upgrade your windows, because changing your lock and handle will help maintain the integrity of your new windows.

When it comes to uPVC window replacement near me handles, there are many different styles. Some are secured by pins or screws while others are fitted with blades that slide into the lock mechanism. Each lock type has its own method of replacing it, and you'll need to know which one you own.

Espag window handles are the most common type, and they're typically found on the latest uPVC windows. The spindle extends from the handle into the lock gearbox, and it activates the locking mechanism when you open the window. These handles are also easy to take off. However, you should be careful not to harm either the mechanism or handle.

Cockspur handles are another alternative to uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur hooks onto the wedge-shaped striker plates on the frame. This type of handle is more difficult to repair than other types however it's an excellent choice for the majority of homes.

Venetian window handles are secured by two bolts and have an elongated projection from the frame, which is not the case with the Espag handle. These handles are great if your goal is to have a flush handle which blends in with uPVC window frames. They're a great choice for commercial and residential buildings.